Find Your Parts

Rancho RS9000XL Adjustable Rear Shocks to suit Nissan Navara D40 4wd (Pair)


Quantity ( Pair )
help2 have a question
wishlist Compare

Quick Overview

paypal easy payment methods

The RS9000XL lifts up the Nissan Navara  to an optimum height which allows the driver to ride the vehicle smoothly and control it in a better way. You can easily monitor the compression and rebound damping by changing the ‘dial in’ setting which is residing at the bottom of the shock. It includes the following features:


Larger 2.75 inch tri tube body*

Large, Heavy duty 18mm Nitro Carb Rod*

9-Postion Tuning Technology

9-Position Adjustment Knob

Gas pressurization of shock

Graphite filled-Fluon banded piston

1.25 inch Diameter Sintered Iron Piston

Rebound Bumper

Liquid Metallic Finish

Protective Boot

Double Welded loops

15 stage velocity sensitive for better stability 

A glass filled Teflon seal and micro polished cylinder wall 

Advanced tri-tube design to deliver outstanding performance under the tough road conditions.

Write a review

    Bad           Good
© Copyright 2016 - Perfectlift - All rights reserved.

Disclaimer: Modifying a vehicle to change the suspension height from the original showroom specification may render the vehicle illegal for use on public roads. Please check the regulations applicable in your jurisdiction before fitting these kits. Excessive height change may also severely limit your vehicle’s suspension travel and could compromise the safety of the vehicle and its occupants. All products displayed on this web site are for off road use only. We recommend checking with the transport authority in your state and obtaining an engineer’s report for all modifications that are carried out. It is also in your best interest to check with your insurance company that they will still cover your vehicle for any modification you intend on performing. We suggest you fully understand all modifications that may be required before purchasing any of our products. If there is any other information on a product you require before purchase please contact Perfect Lift Suspensions. It is the responsibility of the purchaser; installer and end user to make sure any modifications being carried out are to the guidelines of their states motor traffic authority. M3 Engineering Systems Pty Ltd T/A PERFECT LIFT Suspensions take no responsibility for any damage or injury to vehicles, property or persons whilst using any of the products or information from this website.