Front High Strength Aluminium T6 35MM Shock Spacer:
~ T6 Billet Aluminium spacers are 35mm thick and will lift the front of your car around 2" inch. T6 Billet Aluminium is an aircraft grade aluminium with high strength and light weight properties.
~ The spacers shown in the picture are thicker to give extra height. The 35mm spacers fit on top of your strut using OEM studs and nuts.
~ Basic Hand tools are required for installation.
~ You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that they have.
~ New Camber and Caster Bolts are provide for better wheel alignment
~ Upper Control Arm Bump Stops Included in the Kit
NOTE: The spacer height and LIFT is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer. The reason is that the lower control arm compounds the amount of lift due to its angle and length.
REAR Heavy Duty Raised Coil Springs
- Australian Made Coil Springs with 2years/60000 Kms Warranty
- Please specify while purchasing if you need comfort ride or heavy duty coil spring.
- Better handling, control and comfortable ride both On and Off road.
- These Coil Springs will give you approximately upto 2"inch lift (47-50 mm).
Suitable For : For Nissan Navara NP300 D23 4WD Model Only
Package Included :
- 2x T6 Billet Aluminium Spacer
- 2x Heavy Duty Australian Made Coil Springs
- New Camber Caster Bolts
- Upper control Arm Bump Stops
- Instructions to Install
- PERFECT LIFT LIMITED LIFETIME WARRANTY/ Coil Springs 2years-60000Kms Warranty