2" Front and 2" Rear for Mitsubishi Triton MN-ML Lift Kit with Greaseable Shackle

2 sold in last 8 hours
PERFECT LIFT
PKL 92021
53 In stock
$121.00
If your passion beckons you for an adventurous spree on the rugged terrains,  then a magnificent aftermarket accessory you have been planning to own, is here to greet you! PerfectLift brings to you an amazingly exciting lift kit for your Mitsubishi Triton MN/ML, to help you transform it to an...
$121.00
customers are viewing this product
Tags:

If your passion beckons you for an adventurous spree on the rugged terrains,  then a magnificent aftermarket accessory you have been planning to own, is here to greet you! PerfectLift brings to you an amazingly exciting lift kit for your Mitsubishi Triton MN/ML, to help you transform it to an absolute enchanter! This impressive upgrading accessory consists of 25 mm thick spacers, made of aircraft grade T6 billet aluminium, known for its high strength and lightweight properties. OEM studs and nuts help with the fitment of these spacers on top of the strut, using just the basic hand tools. Helping to level out the front factory rake,  these spacers can be used with the standard suspension or even with the aftermarket suspension. The rear heavy duty extended greaseable shackles, which are acknowledged for rendering better handling, better control and comfortable ride, help in conveniently achieving the rear lift of 2 inches. Perfectly suitable for Mitsubishi Triton MN/ ML 4WD  models only, this amazing lift kit can be conveniently installed without requiring any cutting or strut spring preloading. So with this lift kit on, let the adventures keep going!!

Front High Strength Steel 50MM Lift Shock Spacer:


~ T6 Billet Aluminium spacers are 25mm thick and will lift the front of your car around 2"inch-50mm. T6 Billet Aluminium is an aircraft grade aluminium with high strength and light weight properties.
~ The spacers shown in the picture are thicker to give extra height. The 25mm spacers fit on top of your strut using OEM studs and nuts.
~ Basic Hand tools are required for installation.
~ You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that they have.


NOTE: The spacer height and LIFT is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer. The reason is that the lower control arm compounds the amount of lift due to its angle and length.


REAR GREASEABLE EXTENDED SHACKLES


Extended Shackles:
- Greasable Extended Shackle
- Better handling, control and comfortable ride both On and Off road.
- These shackles will give you approximately 2"inch (47-50 mm)or extra lift due to the fact that you are raising just one end of the spring.


Suitable For : For Mitsubishi Triton MN-ML 4WD Model Only


Package Included :

- 2x T6 Billet Aluminium Spacer
- 2x Heavy Duty Extended Greasable Shackles
- Instructions to Install
- PERFECT LIFT LIMITED LIFETIME WARRANTY 

The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
2" Front and 2" Rear for Mitsubishi Triton MN-ML Lift Kit with Greaseable Shackle
You have successfully subscribed!
This email has been registered