- Mazda Lift Kit
- T6 Billet Aluminium Spacers 2.5" Front and 2" Rear LIFT KIT Mazda BT50 greasable shackles 2011 On
Front High Strength Steel 35MM Shock Spacer:
~ T6 Billet Aluminium spacers are 35mm thick and will lift the front of your car around 2.5"inch. T6 Billet Aluminium is an aircraft grade aluminium with high strength and light weight properties.
~ The spacers shown in the picture are thicker to give extra height. The 35mm spacers fit on top of your strut using OEM studs and nuts. ~ Basic Hand tools are required for installation.
~ You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that they have.
NOTE: The spacer height and LIFT is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer. The reason is that the lower control arm compounds the amount of lift due to its angle and length.
REAR GREASEABLE EXTENDED SHACKLES
- Better handling, control and comfortable ride both On and Off road.
- These shackles will give you approximately 2"inch (47-50 mm)or extra lift due to the fact that you are raising just one end of the spring.
Suitable For :For Mazda BT50 2011 Onwards 4WD Model Only
Package Included :
- 2x T6 Billet Aluminium Spacer
- 2x Heavy Duty Extended Greasable Shackles
- Instructions to Install
- PERFECT LIFT LIMITED LIFETIME WARRANTY