T6 Billet Aluminium Spacers 2" Front Lift Kit Mazda BT50 4WD 2011 Onwards

Front High Strength Steel 25MM Shock Spacer:

~ T6 Billet Aluminium spacers are 25mm thick and will lift the front of your car around 2" inch. T6 Billet Aluminium is an aircraft grade aluminium with high strength and light weight properties.
~ The spacers shown in the picture are thicker to give extra height. The 25mm spacers fit on top of your strut using OEM studs and nuts. ~ Basic Hand tools are required for installation.
~ You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that they have.

NOTE: The spacer height and LIFT is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer. The reason is that the lower control arm compounds the amount of lift due to its angle and length.

Suitable For : For Mazda BT50 2011 Onwards 4WD Model Only

Package Included :
- 2x T6 Billet Aluminium Spacer
- Instructions to Install
- PERFECT LIFT LIMITED LIFETIME WARRANTY