3" Front and 2" Rear FOTON TUNLAND Lift Kit Blocks+U Bolts

Front High Strength Steel 35MM Shock Spacer:

~ T6 Billet Aluminium spacers are 35mm thick and will lift the front of your car around 2.75-3"inch. T6 Billet Aluminium is an aircraft grade aluminium with high strength and light weight properties.
~ The spacers shown in the picture are thicker to give extra height. The 35mm spacers fit on top of your strut using OEM studs and nuts. ~ Basic Hand tools are required for installation.
~ You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that they have.
~ Diff drop kit and Bash plate spacer included in the kit to realign the CV angles

NOTE: The spacer height and LIFT is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer. The reason is that the lower control arm compounds the amount of lift due to its angle and length.

REAR CASTED BLOCK KIT

Casted steel Blocks:
- Heavy Duty Casted steel blocks unlike other kits using cheap fabricated or welded blocks.
- Perfect Lift Blocks are tapered at 3 degree for better CV joint alignment.
- High Tensile U bolts are also included in the kit.

Suitable For : For Foton Tunland Only For 4WD Model

Package Included : - 2x T6 Billet Aluminium Spacer
- 2x Heavy Duty Casted Steel Blocks with Locator pins
- High Tensile U bolts
- Diff Drop Kit and Bash Plate Spacers included
- Instructions to Install
- PERFECT LIFT LIMITED LIFETIME WARRANTY

Overview:

Transforming your Foton Tunland with an exciting lift kit from PerfectLift would truly be an amazing experience! With a 3” front and 2” rear raise, your vehicle will surely become an eye-catcher, standing out from the pack! The ground clearance achieved with this impressive lift kit allows you to install bigger tyres, to render your 4wd a breathtaking stance!

The front High Strength Steel 35mm Shock Spacers included in the kit, lifts your vehicle by 2.7 inches to 3 inches. These aircraft grade T6 billet alluminium spacers, that are known to be high on strength and light in weight, comfortably fit on the top of the strut using OEM studs and nuts. Basically being opted for leveling out the front rake, these spacers can be used both with the standard suspension or with the upgraded suspension. The kit also includes a differential drop kit and bash plate spacers, so as to easily realign the CV angles.

The rear Casted Block kit Includes a pair of Heavy Duty Casted Steel Blocks along with locator pins. A better CV joint alignment can be conveniently achieved with the PerfectLift Blocks that are specifically tapered at 3 degrees. This amazing kit also comprises of a pair of U-bolts for extended strength and great performance at the most precarious conditions!

This comprehensive kit promises quality excellence along with easy fitment and a retained suspension geometry. And yes, thrill comes as an absolute add on!!