FORD RANGER PX 2011 Onwards 2.5"F and 2" Rear Suspension Lift Kit
Front High Strength Steel Shock Spacer:
- These spacers are 35mm thick and will lift the front of your car around 2.5 inch.
- The spacers shown in the picture are thicker to give extra height. The 35mm spacers fit on top of your strut using OEM studs and nuts.
- Basic Hand tools are required for installation.
- You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that the have.
NOTE: The spacer height and LIFT is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer. The reason is that the lower control arm compounds the amount of lift due to its angle and length.
REAR LIFT BLOCKS and U BOLTS
- Casted Rear LIFT BLOCKS for maximum strength and performance.
- High Tensile U bolts tested for extra strength and extreme conditions.
- Lift the rear of Ford Ranger PX by 2" Inch.
Suitable For : For Ford Ranger PX 2011 Onwards Only For 4WD Model
- 2x Steel Strut Spacer
2x High strength tappered Casted Blocks for better CV joint alignment
- 4X High Tensile U bolts with nuts and Washers
- Instructions to Install
PERFECT LIFT LIMITED LIFETIME WARRANTY
Features & Benefits:
- Will never break or Fail
- Toughest construction and Precision Engineered
- Safest and Economical way to lift
- Maintains your factory ride quality
- 100% Quality Product
Nothing feels better than driving a lifted 4WD, and with this in mind, PerfectLift offers you a complete range of lift kits that can overhaul your Ford Ranger PX into an absolute show stopper! For a 4WD that instantly captures the attention of every eye on the road, there could be nothing better than this suspension kit, that features the most reliable and world-class quality Pro Shock!
This amazing kit is highly convenient while installing and requires just basic tools for the process. It includes a pair of spacers, 35 mm in thickness, that efficiently lifts up your Ford Ranger PX to a height of 2.5 inches from the front. These spacers, easily fit onto the strut using OEM studs and nuts. Lifting the rear is equally easy with the pair of casted Lift Blocks that help to maximize strength and performance. This exquisite suspension system also features two pairs of High Tensile U-bolts and nuts for extended strength and high level of performance at the most precarious conditions. With this comprehensive kit comes assurance of quality excellence and an absolute ease of fitment along with retained suspension geometry!