FORD RANGER PX 2011 Onwards 2.5"F and 1" Rear Suspension Lift Kit
Front High Strength Steel Shock Spacer:
- These spacers are 35mm thick and will lift the front of your car around 2.5 inch.
- The spacers shown in the picture are thicker to give extra height. The 35mm spacers fit on top of your strut using OEM studs and nuts.
- Basic Hand tools are required for installation.
- You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that the have.
NOTE: The spacer height and LIFT is NOT a 1:1 ratio - Meaning that the lift height achieved is much greater than the actual thickness of the spacer. The reason is that the lower control arm compounds the amount of lift due to its angle and length.
REAR LIFT BLOCKS and U BOLTS
- Casted Rear LIFT BLOCKS for maximum strength and performance.
- High Tensile U bolts tested for extra strength and extreme conditions.
- Lift the rear of Ford Ranger PX by 1" Inch.
Suitable For : For Ford Ranger PX 2011 Onwards Only For 4WD Model
- 2x Steel Strut Spacer
- 2x Casted Blocks
- 4X High Tensile U bolts with nuts and Washers
- Instructions to Install
PERFECT LIFT LIMITED LIFETIME WARRANTY
Features & Benefits:
- Will never break or Fail
- Toughest construction and Precision Engineered
- Safest and Economical way to lift
- Maintains your factory ride quality
- 100% Quality Product
For those, who have a suspension alteration on mind and want to lift their 4WD to a comfortable level with the best suspension kits, then this exciting new kit comprising of superior quality Pro Shock is an unrivalled option!
These shocks are high on performance and are indomitably ideal for on-road, off-road, towing and more! This remarkable accessory would allow larger tyres with increased ground clearance, better traction and also offers an improved ride quality and handling. You will find in this amazing kit, a pair of 35 mm Spacers for the impressive 2.5 inch raise to your Ford Ranger PX. Fitting comfortably on the top of the Strut using OEM studs and nuts, you will just need basic tools for installation. These Spacersare perfect for levelling your 4WD’s front with the rear, perfectly doing away with the front rake. Included in this exciting lifting system to supplement strength and performance are, casted Lift Blocks and High Tensile U-bolts for the rear. So you could harmoniously lift the rear of your Ford Ranger PX by 1 inch to match up with the front and get set for your adventurous expeditions!